How to replace the Transfer Board | HP ProBook x360 11 G5 Education Edition | HP
15
December

By Adem Lewis / in , , , , , , , , , , , , , , , , , , , , , , , , /


How to Replace the Transfer Board Before you begin: Remove the top cover. Removal Using minimal force, lift the locking bar up on the transfer board ZIF connector and disconnect the transfer board ribbon cable from the transfer board. Lift the locking bar up on the webcam ZIF connector and disconnect the webcam ribbon cable from the transfer board. Remove the P1 Phillips broad-head screw that secures the transfer board to the top cover. Lift the transfer board off of the alignment pins on the top cover and remove. Replacement Place the transfer board on the alignment pins on the top cover. Replace the P1 Phillips broad-head screw that secures the transfer board to the top cover. Insert the webcam ribbon cable into its ZIF connector on the transfer board and then press the locking bar down to lock the cable into place. Insert the transfer board ribbon cable into its ZIF connector on the transfer board and press the locking bar down.


2 thoughts on “How to replace the Transfer Board | HP ProBook x360 11 G5 Education Edition | HP

Leave a Reply

Your email address will not be published. Required fields are marked *